Lunch Bag Tutorial

A friend of mine from work asked me if I could make her a lunch bag. She had been using Kroger (local grocery store) bags to take her lunch to and from the office. While we do have a fridge at work, food would stay colder in an insulated lunch bag. So I set out, drafted and created this for her:



So here's how you make the lunch bag. You'll need the following:

• 1/2 yard of Insul-Bright
• 1/2 yard of outer material (I prefer home decor fabric)
• 1/2 yard of liner material
• 3" of velcro

Cut the following sizes from all three pieces of fabric (insul-bright, outer and liner)

• Bottom: (1) 10"x 8"
• Short Sides: (2) 8"x7"
• Long Sides: (2) 10" x 7"
• Flap: (1) 11" x 4
• Top: (1) 11" x 8"
• Handle: 26" x 5"

Match the insul-bright to the outer material for like sizes all of the pieces. Start assembly of the outer by placing the bottom in the middle. Pin all of the sides to the bottom. Should look like this:



The home decor fabric is under the insul-bright in this picture. When you pin be sure to pin the right sides of the home decor fabric together! Here is a close-up



I should warn you that I prefer to do all pinning together and then all sewing together. I don't like to jump around. Next I pinned the sides (right sides of the fabric touching) together. Now you will have a box with the right side of the fabric facing out and the insul-bright on the inside.




Repeat and build a box with the liner.

Now it's time to build the lid! Pin together the top and the flap so right sides are facing each other. You are going to do this with both the liner and the outer/insul-bright. Below you'll see the picture of the liner/insul-bright so just repeat with the liner.




Now pin the two pieces together. Right sides should face each other with the pinned seams facing outwards.




Pinning is mostly done, so off to the sewing machine! Remember all of those pieces you pinned? Now it's time to sew along all of the edges. Just leave a small hole in the bottom of the liner. Here's a picture of the hole I left in my liner:




The tricky part with the boxes are the corners. Be patient and be sure to use a longer stitch when going thru the insul-bright and the fabric.

For the top and flap, first sew the top to the flap for the liner. Be sure to pull it away from the other material so you are only sewing the liner material together. Then repeat with the outside/insul-bright. For the top and flap only sew 3 of the 4 sides together. Sorry, forgot a picture here. Leave the short end of the TOP with raw edges. Once sewn, flip that bad boy inside out! I put pins in so you can see where the top affixes to the flap.




Time to create the handle. Take your handle and iron it in half. Then sew a 1/2 seam down the whole piece. Flip the whole thing inside out. I saw this tip (what a time saver!) on another blog but can't remember where? Once sewn push a piece of rope down the whole tube. Sew the rope to one end. If you tug on the rope, it'll flip the piece inside out in a matter of minutes!!




Time to assemble the lunch bag. Inside your outer box, put the top/lid and pin it to one edge. Be sure the right side of the lid is touching the right side of the outer material.




Next layer in your handle. In my picture the handle is backwards. I realized it after I took the picture. When assembled correctly you should see the back of the handle.




Take your liner and flip it. Put the liner inside the other box so right sides match. This is really important or you'll be mad that it's made inside out. From outside to in, the layers should be insul-bright, outer, lid, handle and liner.





Carefully pin everything in place and SEW. No more pinning after this step. Well, not really. Sew around the whole top of the box and then using that hole you left in the liner, flip it around. Now stuff the liner into your lunchbag. Admire your work but you're not quite done yet....




It's time to make the lid really stay shut and you have a hole in your liner. Hand sew velcro to the center of the flap. Just be sure not to go all the way to the outer fabric.




Fold the flap over and mark where the coordinating velcro should be sewn and hand sew that on.



I leave the hole in the liner while I sew on the velco so I can stick my hand inside and make it easier on myself. Your choice! Then pull the liner out and top stitch the hole shut. Now, you are done!



Make one for yourself. Make one for your kids. Heck make one for your friend!



What do you think? I made it so that frozen lunches and storage containers would fit.

Finally Finished: Casserole Carrier

Bell are ringing

Bird are chirping

The alleluia is at full blast

I'm happy to announce that I am finally finished with my most recent project. It's a casserole carrier. We go to a few cookouts in the winter months and numerous ones in the summer. I saw this and was inspired to make one for myself.

Here's the final product. Isn't it pretty?

The fabric is from JoAnn Fabric and I used Insul-Bright as instructed. During all of the sewing I noticed I didn't have flannel to make the straps thick. I had extra fleece from my love blanket so I used that instead. She says to double up the flannel but I just used single fleece.

I also made mine slightly different since I wanted long pieces to wrap around. I ended up using a lot of velcro. It makes a nice sturdy seal so no heat will be escaping.

I did end up spending lots of time with my seam ripper. I had to rip our the top stitching because I ran out of thread. Then more seam ripping because I put on the one handles wrong. I accidentally ripped out the correct handle so then I had to put that back on. OMG, so much seam ripping. I thought I would never finish.

Anyone who is new to sewing, I tell them to just start sewing. If you mess up, just tear it out! Anyway, I live by that when I sew. I do try to minimize the ripping, but it usually doesn't ruin your project if you sew something wrong. Just rip it out and try again.

The result of all the ripping and sewing is this beauty. I honestly want to make another since I now have the hang of it. It would make a great bridal shower gift!!

Linking to:

Tufted Headboard

We are finally finished with the tufted headboard for our guest room. I keep saying we because I had to ask my husband to help with this project. Here's the finished product:

The tufting had us both frustrated and laughing. It's really pretty but the walls need to be painted to give it some contrast. More painting!! I'll give you the quick rundown of the project, but there are better tutorials online. I looked at a dozen of them before we started.

How we made this after the jump! 

Valentine's Day Love Pillow

I decided to head to Jo Ann's yesterday because I have some special requests for projects. I think I enjoy giving away my crafts as much as I enjoy making them. Anyway, while I was waiting to get my fabric cut, I noticed the remnants were an additional 70% off. I'm one for bargain shopping but I didn't see anything that really struck me. Needless to say, since the place was packed I saw a pile of remnants on the counter that hadn't made it into the bin. SCORE! This Valentines Day fabric which was about 1 ft of fabric for only $0.70. What a deal! So here's my $4 pillow.

After the link, check out the photo shoot with my new friend...